Products

 
 
BENDIX - 4WD
 
FEATURES AND BENEFITS
 

All Bendix 4WD front pads are grooved which significantly improves performance especially when trekking off road. The groove is used to help expel any water, dust or dirt that comes into contact with the pad which becomes more prevalent when travelling off the beaten track. This means Bendix 4WD will continue to perform even under extreme conditions.

 

Bendix Titanium Stripe... saves you time and money.

Bendix 4WD offer quiet, confident braking performance whether it be on road cruising or extreme off road conditions.

 

Bendix 4WD features an exclusive Titanium Stripe providing instant friction to deliver sure stopping power without bedding in, and this means instant friction and positive pedal feel the moment your customers drive out of the workshop.

 

The high friction titanium coating on the brake pad surface mates quickly to the rotor when brakes are first applied and full braking performance is achieved in a few stops.  Normal bedding-in procedure is a minimum of 30 stops – that’s 10 minutes of your time that could be better spent on other jobs!

 
   
 
Features and Benefits:
(EPR) Epoxy-modified phenolic resins
Increased material strength under extreme conditions. Increased heat resistance at high temperatures
Titanium Stripe
No bedding-in required meaning less down time and improved customer satisfaction, instant pedal feel from the first stop.
Application specific material designed for 4WD vehicles
Material is matched to the vehicle type so no matter what you drive - a smaller SUV (Nissan X-trail) or a heavier 4WD (Toyota LandCruiser), you are getting optimum performance.
Product Gasketted*
Decreases the likelihood of noise
Front Pads Grooved*
Dissipates dirt, dust & water meaning the pads will work to maximum capability on or off the road.
Wide Range
All major references available covering majority of compact, medium, large & luxury 4WD vehicles.
Premium Quality product Eliminate Re-work*
Ongoing commitment to total quality means no reworks, saving you both time & money & guaranteeing customer satisfaction & safety on the roads.
 
* "If a part is non-genuine, but is interchangeable with the genuine part, it could be seen as being fit or appropriate for the purpose and would therefore not void the manufacturer's warranty." Source: Australian Competition & Consumer Commission (ACCC) ruling published in Consumer Express publication, April 2005, Issue 1445-9671
 
COPYRIGHT © 2016 FMP AUTOMOTIVE (MALAYSIA) SDN. BHD. ALL RIGHTS RESERVED. PRIVACY POLICY | DISCLAIMER    Bookmark and Share